Products - Water Purification Units
Ultrafiltration (UF) is a pressure-driven membrane separation process that separates particulate matter from soluble components in the carrier fluid (such as water). UF membranes typically have pore sizes in the range of 0.01 – 0.10 μm (micrometer) and have a high removal efficiency for bacteria and most viruses, colloids and silt. The smaller the nominal pore size, the higher the removal efficiency.
It is the ability to remove bacteria, viruses and other pathogens that has increased the use of UF membranes for water treatment applications. Using UF membranes, raw water can be disinfected without the use of excessive levels of chemical disinfectants, like chlorine, which can result in chlorinated by products. In addition, certain microbes like cryptosporidium cannot be effectively controlled with chlorine and typical media filtration alone. Ultrafiltration provides a positive barrier for microorganisms in water that can be effectively monitored.
OriginClear offers two types of filtration products: Dead End and Submerged.
We offer a complete line of Reverse Osmosis (RO) systems to meet the needs of each individual client. Systems can range from 1 Gallon Per Minute (GPM) to 800 GPM on a single skid. All systems are designed, based on the client's raw water source and desired final water quality.
Our systems include brackish, nanofiltration, and desalination systems in single- and double-pass (product staged) configurations.
A water filter is a relatively inexpensive device that will improve the overall taste, smell and appearance of your drinking water, while removing some of the harmful suspended particles and chemicals found therein. Filtration can also be used to protect other process systems (such as Reverse Osmosis), and equipment from debris that can foul or damage process components.
OriginClear offers a complete line of Industrial Water Filtration products, including carbon, multi-media, sand, greensand, inline mesh strainer, and cartridge and bag filtration, to name a few. Systems are designed and built for each application.
Calcium (Ca2+) and magnesium (Mg2+) ions that cause water hardness can be removed fairly easily by using an ion exchange (water softening) procedure. Softening involves the replacement of the hardness ions with a non-hardness ion. Water softeners usually use sodium (Na+) as the exchange ion. As hard water passes through a softener, the calcium and magnesium trade places with sodium ions. Sodium ions thus replace the hardness ions in the water.
We offers a complete line of Industrial Water Softening products to meet the needs of each individual client. Equipment is designed and built to the highest specifications. In every case, the customer's requirements and preferences are considered prior to any design.
Deionization (ion exchange) is a very efficient process for removing dissolved salts and minerals; mixed-bed deionizers provide higher-quality, neutral pH, and better removal of silica and CO2 than mono-bed systems.
Deionization systems can produce the quality of water required for any specific application, up to 18 megohm/cm resistivity @25C.
OriginClear offers a complete line of industrial ion exchange products to meet the needs of each individual client. Ion exchange options include softening, two-bed, mixed-bed, packed-bed (to 200 GPM/train), ion specific removal systems (i.e., nitrate, arsenic, etc.), electrodeionization (EDI), and non-regenerable units. All systems are designed and built to the highest standards. In every case, the customer's requirements and preferences are considered prior to any design.
Electrodeionization (EDI) uses the water purification benefits of ion exchange resin while eliminating the disadvantages of chemical regeneration, which is done by combining ion exchange resin with electrodialysis. The elements required for the electrodialysis process consist of ion-selective cation and anion membranes, electrodes, concentrate chambers, dilute chambers and DC current. The result is electrodeionization, which is a continuous, chemical-free system which generates high resistivity water of up to 18 meg-ohm-cm @ 25°C).
OriginClear offers a complete line of EDI systems, customized for each application. All systems are custom design/build equipment. In every case, the customer’s requirements and preferences are considered prior to any design.
OriginClear can provide complete containerized water treatment packages. This can potentially save thousands of dollars over client-provided water treatment buildings, especially if a new building is required.
We pick out the best “one-way” shipping containers (20-ft., 40-ft. and High Cube type), and provides all electrical and mechanical connections inside, as well as a no-slip surface on the floor.
Units can be insulated and air conditioned as required, based on their final destination. Client will have one outside electrical power drop. And there will be 3-4 flanged outside mechanical connections.